Workrite Sierra HX Crank Rectangular Concave Front Height Adjustable Workcenter
Description of Workrite Sierra HX Crank Workcenter:
Open up your workspace to greater possibilities. Sierra HX is the natural choice for seated height adjustment with maximum clearance. Its hidden crossbar mounts directly to the worksurface. So no matter your height, you will always have plenty of room to stretch out and position your worktools wherever they need to go.
Sierra HX Crank and Pin open up a world of possibilities. The Sierra HX is available in over 100 shapes and sizes and your choice of crank or pin-set adjustment.
Our new Silhouette Collection worksurfaces are ½" thin and feature an ergonomic edge detail. Plus, Silhouette Collection worksurfaces are composed of GREENGUARD certified material. All Sierra HX workcenters contain a minimum of 28% LEED Recycled content..
Features of Workrite Sierra HX Crank Table:
Hidden crossbar design provides optimum knee clearance and under worksurface access.
Available in 24 worksurface styles in over 60 laminate and thermofoil trim options.
Height range: 22"-34" at 1" per 6.6 turns.
Lifting capacity: 150 lbs
Available in Sierra silver or charcoal finish.
Base only or full workcenter.
Compatible with full line of tool bar and rally system accessories .
Environmental Considerations:
LEED credit eligibility
Materials and resources credit 4.2
Recycled content: 20% (post-consumer + ½ pre-consumer) (2 points)
Innovation in design, credit 1.1-1.4 (1-4 points)
Implementation of comprehensive ergonomic program
Values shown for LEED range are for laminate versions; all base-only models contain at least 28% LEED Recycled Content for Crank and Pin set models.
Silhouette worksurface made from GREENGUARD certified material
Option 1 : Choose your Surface Dimensions
Model SCFHX4830C : 48" W x 30" D Surface Dimensions
Model SCFHX6030C : 60" W x 30" D Surface Dimensions
Model SCFHX7230C : 72" W x 30" D Surface Dimensions
Option 2 : Crank Handle
Right Side
Left Side
Option 3 : Choose your Base Frame Colors
Colors and patterns are representative only. Actual colors and patterns may vary slightly.
Sierra Silver (S)
Charcoal (C)
Option 4 : Choose your Laminate Top Colors
Classic Collection Laminates:
Colors and patterns are representative only. Actual colors and patterns may vary slightly.
Folkstone Gray
SG241
Opti Gray
SG213
Black
SE101
Ice Fishin
WF181
White Spectrum
AW785
Gateway To the Future AV100
Cavalcade South
AT650
Tropical Gateway
AV110
Summer Heat Wave AO360
IL Palio Papel
AV981
Coriander Fiber
AT981
Leave Likatre
WP120
Looks Likatre
WP110
Appears Likatre
WP115
Seems Likatre
WP125
Hardrock Maple
WM791
Pearwood
WX031
Shaker Cherry
WC521
Oiled Cherry
WC421
Jewel Mahagony
WY351
Black Ashwood
SZ101
Designer Collection Laminates:
Colors and patterns are representative only. Actual colors and patterns may vary slightly.
Spa White
S740T
Almond
ST655
Putty Gray
SG209
Taupe
ST606
Sage
SV720
Cubicle Papel
AG561
Gray Santos
AG291
Negotiating In Geneva PFA60
Beige Crepe
AT251
Opti gray Crepe
AG341
Vanilla Fiber
AW871
Wheat Fiber
AT991
Oatmeal Fiber
AT101
Thyme Fiber
AV721
Shipping Seattle Java PFA48
Pepper Fiber
AG581
Manila Linen
AT231
Gridlock In LA
PFA51
Travelin Light
AT680
Gold Pannin
AT710
Passin Through
AV250
Blue Sandstone
AB191
Caramel Crepe
AT111
Amber Raffia II
AO355
Brick by Brick
AR350
Anigre
WX041
Millwork Cherry
WC431
Honey Maple
WM951
Yorkshire Cherry
WC411
Moroccan Fresco
AT121
Silhouette Collection Laminates:
Colors and patterns are representative only. Actual colors and patterns may vary slightly.
Colors and patterns are representative only. Actual colors and patterns may vary slightly.
Cashmere Fiber
98930
Northern Gray
448395
Studio White Dust 488885
American Natural
498150
Auburn Pear
488898
Hayward Cherry
498120
Clove
490340
Ebony Starlight
89865
Option 5 : Choose your Edge Treatments
Edge Treatments for Laminated Surfaces:
Standard
Colors 01 - 05
Wedge
Black only - 06
Ripple
Black only - 07
Standard Edge Colors:
Colors and patterns are representative only. Actual colors and patterns may vary slightly.
Folkstone - 01
Black - 02
Opti Gray - 03
Almond - 04
HW Brown - 05
Soft White - 53
Edge Treatments for Silhouette Surfaces:
Ergo - S1
Block - S2
Craft - S3
Edge Treatments for Thermofoil Surfaces:
Block - B1
Cascade - C1
Option 6 : Choose your Casters
Sierra Locking Casters
Features:
Low profile locking casters 2" W x 1.5" H.
Casters raise work centers by 1" versus installed adjustable glides.
Can be used with all Workrite adjustable work centers, recommended for Sierra workcenters.
Four (4) casters required for 2 leg workcenters, five (5) casters required for 3 leg workcenters.
The Following casters are available:
95234: 4 casters for 2 leg Tables
95235: 5 casters for 3 leg Tables
Option 7 : Pinch Points
Dimensions provided above are nominal. Actual widths of all tables are reduced by 2" and depths by 1". For example, a nominal 72" × 72" × 24" large corner table has an actual dimension of 70" × 70" × 23", and a 72" × 30" rectangular table has an actual dimension of 70" × 29".
Workcenter Ordering Information
1.Thermofoil minimum quantity 10 tables per base model number (i .e . SCFHX6030). If ordering a total of 10 or more units with multiple base model numbers, please consult Factory for quote.
For base only units, only model # and metal finish is required (example SCF727224-S).
Classic Collection Laminates: 10 working days for quantity 20 or less
Silhouette Collection for only Workrite Sierra HX: 10 working days for quantity 10 or less
Thermofoil Collection Laminates: 6 week for quantity 50 or less.
Designer Collection Laminates: 20 working days for quantity 10 or less.
Note: Dimensions provided above are nominal. Actual widths of all tables are reduced by 2" and depths by 1".
For example, a nominal 72" × 72" × 24" large corner table has an actual dimension of 70" × 70" × 23", and a 72" × 30" rectangular table has an actual dimension of 70" × 29".
Modular, high strength steel frame mounts to worksurface, exceeds ergonomic knee clearance requirements.
All tables have adjustable glides providing ½" adjustment.
Worksurfaces are pre-drilled with mounting location for bases. Joining kit provided for all two piece tops. Silhouette surfaces include screws to mount accessory items under the worksurface.
Special drill bit required, can be ordered separately.
All tables and bases ship unassembled. Weight information is shipped weight for laminate option only.
Literature(Please open the following documents for more technical information)
- pdf
