
|
|
|
Description of Workrite Sierra HX Pin Workcenter:
|
Open up your workspace to greater possibilities. Sierra HX is the natural choice for seated height adjustment with maximum clearance. Its hidden crossbar mounts directly to the worksurface. So no matter your height, you will always have plenty of room to stretch out and position your worktools wherever they need to go.
Sierra HX Crank and Pin open up a world of possibilities. The Sierra HX is available in over 100 shapes and sizes and your choice of crank or pin-set adjustment.
Our new Silhouette Collection worksurfaces are ½" thin and feature an ergonomic edge detail. Plus, Silhouette Collection worksurfaces are composed of GREENGUARD certified material. All Sierra HX workcenters contain a minimum of 28% LEED Recycled content..
|
Features of Workrite Sierra HX Pin Table:
|
-
Hidden crossbar design provides optimum knee clearance and under worksurface access.
|
-
Available in 24 worksurface styles in over 60 laminate and thermofoil trim options.
|
-
Height range: 22"-34" at 1" pin-set increments.
|
-
Lifting capacity: 250 lbs
|
-
Available in Sierra silver or charcoal finish.
|
-
Base only or full workcenter.
|
-
Compatible with full line of tool bar and rall system accessories .
|
Environmental Considerations:
|
-
LEED credit eligibility
-
Materials and resources credit 4.2
-
Recycled content: 20% (post-consumer + ½ pre-consumer) (2 points)
-
Innovation in design, credit 1.1-1.4 (1-4 points)
-
Implementation of comprehensive ergonomic program
-
Values shown for LEED range are for laminate versions; all base-only models contain at least 28% LEED Recycled Content for Crank and Pin set models.
-
Silhouette worksurface made from GREENGUARD certified material
|
|
|
Option 1 and 2 : Choose your Desk Top Position and Surface Dimensions
|
P Peninsula Left (Round P section is on the Left side, in the back) |
P Peninsula Right (Round P section is on the Right side, in the back) |

|

|
SNHX603630PL : 60" x 37" x 30" Surface Dimensions
|
SNHX603036PR : 60" x 30" x 37" Surface Dimensions
|
SNHX723630PL : 72" x 37" x 30" Surface Dimensions
|
SNHX723036PR : 72" x 30" x 37" Surface Dimensions
|
SNHX843630PL : 84" x 37" x 30" Surface Dimensions
|
SNHX843036PR : 84" x 30" x 37" Surface Dimensions
|
|
|
Option 3 : Choose your Base Frame Colors
Colors and patterns are representative only. Actual colors and patterns may vary slightly.
|

Sierra Silver (S)
|

Charcoal (C)
|
|
|
|
Option 4 : Choose your Laminate Top Colors
|
Classic Collection Laminates:
Colors and patterns are representative only. Actual colors and patterns may vary slightly.
|

Folkstone Gray
SG241
|

Opti Gray
SG213
|

Black
SE101
|

Ice Fishin
WF181
|

White Spectrum
AW785
|

Gateway To the Future AV100
|
|
|
|
|
|
|

Cavalcade South
AT650
|

Tropical Gateway
AV110
|

Summer Heat Wave AO360
|

IL Palio Papel
AV981
|

Coriander Fiber
AT981
|

Leave Likatre
WP120
|
|
|
|
|
|
|

Looks Likatre
WP110
|

Appears Likatre
WP115
|

Seems Likatre
WP125
|

Hardrock Maple
WM791
|

Pearwood
WX031
|

Shaker Cherry
WC521
|
|
|
|
|
|
|
|

Oiled Cherry
WC421
|

Jewel Mahagony
WY351
|

Black Ashwood
SZ101
|
|
|
Designer Collection Laminates:
Colors and patterns are representative only. Actual colors and patterns may vary slightly.
|

Spa White
S740T
|

Almond
ST655
|

Putty Gray
SG209
|

Taupe
ST606
|

Sage
SV720
|

Cubicle Papel
AG561
|
|
|
|
|
|
|

Gray Santos
AG291
|

Negotiating In Geneva PFA60
|

Beige Crepe
AT251
|

Opti gray Crepe
AG341
|

Vanilla Fiber
AW871
|

Wheat Fiber
AT991
|
|
|
|
|
|
|

Oatmeal Fiber
AT101
|

Thyme Fiber
AV721
|

Shipping Seattle Java PFA48
|

Pepper Fiber
AG581
|

Manila Linen
AT231
|

Gridlock In LA
PFA51
|
|
|
|
|
|
|

Travelin Light
AT680
|

Gold Pannin
AT710
|

Passin Through
AV250
|

Blue Sandstone
AB191
|

Caramel Crepe
AT111
|

Amber Raffia
AO351
|
|
|
|
|
|
|

Brick by Brick
AR350
|

Anigre
WX041
|

Millwork Cherry
WC431
|

Honey Maple
WM951
|

Yorkshire Cherry
WC411
|

Moroccan Fresco
AT121
|
Silhouette Collection Laminates:
Colors and patterns are representative only. Actual colors and patterns may vary slightly.
|

Folkstone Gray with Black Core
SG241
|

White Spectrum with Black Core AW785
|

Hardrock Maple with Brown Core WM791
|

Looks Likatre with Black Core
WP110
|

Appears Likatre with Brown Core WP115
|

Seems Likatre with Brown Core WP125
|
|
|
|
|
|
|
|
|

Oiled Cherry with Brown Core WC421
|

Black with Black Core
SE101
|
|
|
Thermofoil Collection Laminates (Minimum 10 Desks):
Colors and patterns are representative only. Actual colors and patterns may vary slightly.
|

Cashmere Fiber
98930
|

Northern Gray
448395
|

Studio White Dust 488885
|

American Natural
498150
|

Auburn Pear
488898
|

Hayward Cherry
498120
|
|
|
|
|
|
|
|
|

Clove
490340
|

Ebony Starlight
89865
|
|
|
|
|
Option 5 : Choose your Edge Treatments
|
Edge Treatments for Laminated Surfaces:
|

|

|

|

Standard
Colors 01 - 05
|

Wedge
Black only - 06
|

Ripple
Black only - 07
|
|
|
|
Standard Edge Colors:
Colors and patterns are representative only. Actual colors and patterns may vary slightly.
|

Folkstone - 01
|

Black - 02
|

Opti Gray - 03
|

Almond - 04
|

HW Brown - 05
|

Soft White - 53
|
|
Edge Treatments for Silhouette Surfaces:
|

Ergo - S1
|

Block - S2
|

Craft - S3
|
|
Edge Treatments for Thermofoil Surfaces:
|

|

|

Block - B1
|

Cascade - C1
|
|
|
Option 6 : Choose your Casters
|
Sierra Locking Casters

Features:
-
Low profile locking casters 2" W x 1.5" H.
-
Casters raise work centers by 1" versus installed adjustable glides.
-
Can be used with all Workrite adjustable work centers, recommended for Sierra workcenters.
-
Four (4) casters required for 2 leg workcenters, five (5) casters required for 3 leg workcenters.
The Following casters are available:
|
|
|
Option 7 : Pinch Points
|
Dimensions provided above are nominal. Actual widths of all tables are reduced by 2" and depths by 1". For example, a nominal 72" × 72" × 24" large corner table has an actual dimension of 70" × 70" × 23", and a 72" × 30" rectangular table has an actual dimension of 70" × 29".
|
|
|
Option 8 : HX Spacer
|
HX Accessory Spacers

Attach the spacer to the leg motor with the #M6x12 mm Button Cap Screws

Secure the support angle to the table top with the #12x3/4" Pan Head Hex Sheet Metal Screws
Features:
-
Provides 3" or 5" of additional mounting depth under worksurface for accessories including keyboard platforms.
-
3" spacer can mount to either 24"D or 30"D workcenters; 5" spacer can only be used on 30"D workcenters.
-
For 3 leg dual depth workcenters, order spacer for narrowest side.
-
Quantity 2 spacers provided.
The following Spacers are available:
-
SHX-24SPCR: 3" depth spacer, weight 4 lbs
-
SHX-30SPCR: 5" depth spacer, weight 7 lbs
|
|
|
Workcenter Ordering Information
|
1. Thermofoil minimum quantity 10 tables per base model number (i .e . SCFHX6030). If ordering a total of 10 or more units with multiple base model numbers, please consult Factory for quote.
For base only units, only model # and metal finish is required (example SCF727224-S).
Classic Collection Laminates: 10 working days for quantity 20 or less
Silhouette Collection for only Workrite Sierra HX: 10 working days for quantity 10 or less
Thermofoil Collection Laminates: 6 week for quantity 50 or less.
Designer Collection Laminates: 20 working days for quantity 10 or less.
Note: Dimensions provided above are nominal. Actual widths of all tables are reduced by 2" and depths by 1".
For example, a nominal 72" × 72" × 24" large corner table has an actual dimension of 70" × 70" × 23", and a 72" × 30" rectangular table has an actual dimension of 70" × 29".
Modular, high strength steel frame mounts to worksurface, exceeds ergonomic knee clearance requirements.
All tables have adjustable glides providing ½" adjustment.
Worksurfaces are pre-drilled with mounting location for bases. Joining kit provided for all two piece tops. Silhouette surfaces include screws to mount accessory items under the worksurface.
Special drill bit required, can be ordered separately.
All tables and bases ship unassembled. Weight information is shipped weight for laminate option only.
|
|
|
Literature (Please open the following documents for more technical information)
|
|
|
|
- pdf
|
|
- pdf
|
|