Long Reach Camera Arm - ErgoDirect EDC-1201C
- Long reach articulating arm for camera in color black
- Allows camera to rotate 360 degrees and tilt 200 degrees
- Enables movement along 3 axes to take photos directly from above
- Carries cameras weighing 3-15 lbs
- Offers 24" horizontal extension and 16" vertical adjustment (8" up, 8" down)
- Attaches through camera's standard threaded socket
- Ideal for still and tabletop pictures
Description
EDC-1201C is a long reach adjustable arm for camera that lets you
position your camera and take pictures from a variety of angles, that
may be difficult from a tripod. Mount this arm on your desk or on the
wall, attach your camera and you are ready to shoot pictures.
The arm articulates along its three axes and a wide 200 degree tilt allows
shooting pictures directly from above on a table - an ideal situation
for food photography. The sturdy design and construction of this arm
also protects the camera from falls and resulting damage.
There is a bracket that attaches to the tilter head with one screw to
the same threaded hole in the bottom of the camera, same as it is used
on a tripod. The screw on top of tilter is designed to support standard
hole in the bottom of the cameras.
Float your camera weightlessly - fluid motion on three joints allows
you to effortlessly reposition. It’s perfect for still and tabletop
photography.
Technical Drawing
Technical Specifications
Color | 104 - Vista Black |
Extension Range | 24" (61 cm) |
Height Adjustment | 16" (40.6 cm) |
Pivot | Landscape / Portrait |
Rotation | 360 degrees at three joints |
Tilt | 200 degrees |
Monitor Weight | 3 - 15 lbs (1.3 - 6.8 kg) |
Mount Configurations | Desk Edge, Thru-Desk, Grommet, Wall, Reverse Wall, Side Bolt |
VESA Compatibility | N/A |
Warranty | 10 Years |
Features
FLEXmount with 6 mounting options is available
Camera may be rotated 360 degrees
Arm articulates 360 degrees at 3 joints, allowing great flexibility
200 degrees of tilt is available for the camera
Attaches via your camera’s standard 1/4 x 20 threaded socket
Power cables clip beneath the arm, keeping them out of your way
Optional 6" extender tube available to raise monitor (see Extender Tubes under Accessories)
Product Options/Accessories







Model | EDC-1201C |
Manufacturer | Ergodirect |
Part Number | 7016-500hy |
Color | 104: Vista Black |
Monitor Weight | 3 - 15 lbs (1.3 - 6.8 kg) |
Rotation | At three joints 360 degree |
Tilt | 200 degree |
Mounting Options | Desk |
Mounting Options | Wall |
Mounting Options | Slatwall |
Mounting Options | Pole |
Number of Monitors | 1 Monitor |
Height Adjustment | 16" (40.6 cm) |
Extension | 24" (61 cm) |
Pivot | Landscape to Portrait |
Mounting Options | Desk Edge, Thru-Desk, Grommet, Wall, Reverse Wall, Side Bolt |
Warranty | 10 Years |
Review this product
![]() |
by Henry L, Ohio
Warranty
Seller warrants that its products will be free from defects in material and workmanship when the title passes to the buyer. Seller will repair or replace, at its discretion, any defective product without charge (shipping charges excluded) for a period of 10 years (exception: 1 year for Busby, 5 years for Winston Workstation, Winston-E, Winston Desk and Freedom Desk, 3 years for Tablik and 1 year for Bild motorized column) after the original date of sale, unless the product damage resulted from normal wear and tear, buyer abuse, misuse or negligence or failure to follow instructions related to the products’s installation or intended use. Seller may require proof of purchase before performing any repairs or replacing any products during the warranty period. Except as specifically set forth above, seller makes no warranties, express or implied and specifically disclaims any warranty of merchantability or fitness for a particular purpose. Repair or replacement of the product ordered from seller shall be buyer’s exclusive remedy.