Workrite Sierra HXL Crank Rectangular Height Adjustable Table
Standard lead time for our laminated worksurfaces is 20 business days for quantities of 10 or less.
Description
A great alternative for the healthy workforce. The Workrite Sierra HXL Crank is engineered to enable manual adjustability requiring minimal amounts of human force, making it a good alternative for the healthy workforce or for areas where frequent adjustments are not required.
The HXL Crank adjusts from 25.5"-43" and will accommodate the average male or female worker, making it a good solution for companies seeking limited height adjustability. It adjusts at a rate of 5.6 turns per inch even with more than 125 pounds of equipment on the worksurface.
Sierra HXL Crank is available in silver with two foot design options that can be selected to build the best work center for each specific application.
Dimensions
Workcenter Features
Frame options: 2-leg frames
24" or 30" depths
Widths from 36" to 72" depending on shape
Finish options: Silver, Black, White
Height Range: 25.5" to 43"
Payload Capacity: 125 pounds
Travel Speed: 1 inch = 5.6 turns
Front or top mounted crank
Flat Foot Kit
Low profile design allows most mobile pedestals to set over foot
Sold in pairs
Silver, black, or white, powder coated steel construction
Select worksurface depth of 24", 30" or dual depth
Option 1: Surface Dimensions
| Worksurface 34" x 23" ST3423-B3 and Frame Set SCFHXL36 |
| Worksurface 40" x 23" ST4023-B3 and Frame Set SCFHXL42 |
| Worksurface 46" x 23" ST4623-B3 and Frame Set SCFHXL48 |
| Worksurface 52" x 23" ST5223-B3 and Frame Set SCFHXL54 |
| Worksurface 58" x 23" ST5823-B3 and Frame Set SCFHXL60 |
| Worksurface 64" x 23" ST6423-B3 and Frame Set SCFHXL66 |
| Worksurface 70" x 23" ST7023-B3 and Frame Set SCFHXL72 |
| Worksurface 34" x 29" ST3429-B3 and Frame Set SCFHXL36 |
| Worksurface 40" x 29" ST4029-B3 and Frame Set SCFHXL42 |
| Worksurface 46" x 29" ST4629-B3 and Frame Set SCFHXL48 |
| Worksurface 52" x 29" ST5229-B3 and Frame Set SCFHXL54 |
| Worksurface 58" x 29" ST5829-B3 and Frame Set SCFHXL60 |
| Worksurface 64" x 29" ST6429-B3 and Frame Set SCFHXL66 |
| Worksurface 70" x 29" ST7029-B3 and Frame Set SCFHXL72 |
Option 2: Laminate Top Colors
Colors and patterns are representative only. Actual colors and patterns may vary slightly
Tier 1
White
SW811SD
Folkstone Gray
SG241SD
Slate
SG228SD
Hardrock Maple
WM791SD
Millwork Cherry
WC431SD
Formal Mahogany
WY031SD
Walnut Grove
WW050SD
Tier 2
Beigewood
0785060
River Cherry
0793738
Pinnacle Walnut
0799238
Monticello Maple
0792538
Wild Cherry
0705460
Persian Cherry
0798938
Shadow Zephyr
0485760
Misted Zephyr
0484360
Tier 3
Grey Elm
8201K12
Fawn Cypress
8208K16
Veranda Teak
8209K28
Phantom Cocoa
8213K28
Studio Teak
7960K18
Phantom Charcoal
8214K28
Skyline Walnut
7964K12
Walnut Heights
7965K12
Figured Mahogany
7040K78
Black Velvet
0159538
Option 3: Base Frame Color
Option 4: Crank Handle
Top Crank Handle
Front Crank Handle
Option 5: Foot Type
Flat Foot Set
Flat foot for use with any Workrite height adjustable workcenter. It is available in finishes that coordinate with our frame sets and in 23" or 29" lengths.
Option 6: Casters - Wheels
Low Profile Casters
- Dual wheel casters designed for use on carpet floors
- Low profile 2" w x 1.5" h, locking, 37 mm diameter black wheels
- Casters raise work centers by 1"
- Use with all Styled Foot and Flat Foot Kits (not available on Cascade Work centers)
- 95234 - Four casters for 2-leg work centers, 95235 - five casters for 3-leg work centers
- 400 lbs gross capacity
Premium Polyurethane Casters
- Compatible with carpet and hard flooring
- Locking casters with smooth rolling 1"w × 3"h translucent polyurethane wheels
- Casters raise work centers by 3.5"
- Use with all Styled Foot and Flat Foot Kits (not available on Cascade Work centers)
- ACC-CASTER-4PK3IN-CP - Four casters for 2-leg work centers, 400 lbs gross load capacity
- ACC-CASTER-5PK3IN-CP - Five casters for 3-leg work centers, 500 lbs gross load capacity
Workcenter Ordering Information
Determining the correct size and shape of your worksurface is extremely important. Combining a Workrite worksurface with any height adjustable base requires 1" of clearance at each side and in the back of the worksurface to avoid pinching or scraping. All Workrite worksurfaces are manufactured to the dimensions required to provide these clearances.
Worksurfaces are pre-drilled with mounting location for frame sets or bases.
Joining kits are provided with all two piece worksurfaces.
Standard lead time for our laminated worksurfaces is 20 business days for quantities of 10 or less. Lead times for larger product orders will be provided upon receipt of the order.
Important Notes:
Workcenters ship unassembled and require simple hand tools to install.
If using customer’s own worksurfaces, pre-drill pilot holes for all screws to ensure the most secure attachment.
If installing a keyboard arm or track, the electric motor control box may need to be repositioned from its pre-drilled location.
All workcenters have adjustable glides providing 0.5" of adjustment.
Mobile pedestals may limit lower height range.
Product Options/Accessories
Frequently Asked Questions
Crank desks can only accommodate a maximum cut track 16” in length (it does not need a spacer.) It will not accommodate a 22” track. The Sierra HXL series will accommodate your 22” track.
Yes, your Pinnacle arm will work under the 24" deep desk as long as the track you have is 17 or 22".
| Model | Rectangular |
| Manufacturer | Workrite Ergonomics |
| Part Number | Rectangular |
| Width Range | 36" to 72" |
| Height Range | 25.5" to 43" |
| Lifting Capacity | 125 lbs |
| Desk Type | Crank |
| Desktop Shape | Rectangular Top |
| Travel Speed | 5.6 turns per inch |
Customer reviews
- 1 stars 0
- 2 stars 0
- 3 stars 0
- 4 stars 0
- 5 stars 0
Warranty
Workrite warrants to the original purchaser that the products it manufactures are free from defects in design, material and workmanship. Subject to the limitations below, Workrite warrants each product in this catalog to be free from defects in materials and workmanship for the life of the product in its original installation. With prompt written notice, Workrite will repair or replace, free of charge, any product, part or component which fails under normal use as a result of such defect.
Sierra HX Height Adjustable Workcenter components - Limited Lifetime
Electric components, motors, frames, brackets and feet.
All of the following exceptions to the limited lifetime warranty apply:
Fundamentals Electric Height Adjustable Workcenter components - 10 years
Electric components, motors, frames, brackets and feetEssentia Height Adjustable Workcenter components - 5 years
Electric components, motors, frames, brackets and feetLaminated worksurfaces and modesty panels - 5 years
Sierra HXL Crank Height Adjustable Workcenter components - 5 years
Including crank mechanismsCascade Height Adjustable Workcenter components - 5 years
Including counter-balance mechanismsLine of Sight electrical components and manual lifts - 5 years
Line of Sight frames and metal desk parts - 5 years
Monitor supports and mounts - 10 years
Solace Clamp-on sit-stand products - 5 years
Solace Desktop sit-stand products - 2 years
LED and florescent lighting fixtures - 5 years
Lighting transformers and fluorescent ballasts - 1 year
Tranquility Wool & PET Felt panels and mounts - 5 years
Tranquility Poly Panels - 2 years
Fabrics, modesty panels, custom products and special order items - 2 years
Mousing surfaces and Slide Guide - 1 year
