Humanscale M/Flex for M2.1 Multi-Monitor Arm System
Humanscale M/Flex transforms any workspace with unprecedented flexibility and ergonomic performance. Designed for today’s agile work environment, users can easily add or remove monitors without disrupting the originally configured installation. This multi-monitor arm system accommodates endless configurations and is fully compatible with Humanscale’s next generation monitor arms - providing all of the cutting-edge features of the line.
Easy to install and simple to upgrade for an overall reduced cost of ownership, M/Flex is the most scalable solution available for the modern workplace.
M/Flex’s modular design makes it simple to reconfigure and allows for independent adjustment of monitors when they are used separately - encouraging flexibility and collaboration at the workstation. By easily setting monitors at an optimal distance and height, M/Flex increases usable desk space and allows the user to work in a healthy posture throughout the day.
Its revolutionary adjustable brackets, B1 and B12, allow the user to easily upgrade to multiple monitors without the need to purchase any additional equipment aside from the monitor arm itself. Simply remove the cover and pop the arm into place using Quick Release joints that instantly snap together for a secure fit.
|Weight Capacity||Supports up to 100 lbs|
|Maximum Arm Reach||Up to 28"|
|Maximum Height Adjustment||
|Monitor Capacity||Up to 6 monitors|
|Product Material||Recycled Aluminum|
|Warranty||15 years 24/7|
Innovative Design - The M/Flex multi-monitor arm system allows the user to simply swap attachments to suit their changing technology needs while retaining a sleek, minimal aesthetic. Manufactured primarily from recycled aluminum, M/Flex is as recyclable as it is beautiful.
Greater Versatility - M/Flex offers the most versatile, modular multi-monitor system available. By lifting up to six monitors up to 20 lbs each off the work surface, M/Flex frees up valuable desk space, helping to preserve the existing office aesthetics. M/Flex’s removable 180-degree stop also protects walls and panels.
Unparalleled Customization - M/Flex offers effortless adjustment and enables easy, spontaneous configurations. With its plug-and-play customization, M/Flex allows users to add monitor arms, attachments and accessories as needed. M/Flex is the perfect addition to the modern and constantly evolving workspace and, when paired with the M/Connect™ monitor arm base, users can completely eliminate cable clutter and gain easy access to USB ports and high-speed charging.
Scalable solution accommodates future additions of up to 6 monitors
Compatible with Humanscale’s M2.1, M8.1 and M10 monitor arms
Reduces future installation costs by allowing for simple reconfigurations
Available with accessories such as Notebook Holders, Crossbars, Thin Client Holders, UFEAs, Colored VESA Covers and Sliders
Patent-pending Smart Stop allows the user to customize the rotation of the arm, preventing overhang and protecting surrounding equipment
Patent-pending Quick Release Joints instantly snap together for a secure and robust fit, simplifying installation
Compatible with M/Connect, M/Connect 2 and M/Power, the first-ever integrated monitor arm bases and docking stations of their kind
M/Flex was designed by the Humanscale Design Studio to be the world’s most flexible and scalable multi-monitor arm system. The team wanted to make a system that was simple to alter, easy to install and expand and that meets the changing technological demands of workspaces.
Humanscale Design Studio designed M/Flex to be easy to install, simple to
upgrade and meet the needs of the ever-evolving workplace. Unlike other
multimonitor solutions, M/Flex has a small footprint and
a sleek, minimal aesthetic that will stand the test of time in both performance and design.
Humanscale M/Flex is designed using fewer and lighter components to
conserve energy, save valuable resources and reduce its environmental impact.
Like all Humanscale products, M/Flex is built with sustainable, non-toxic
material and its durable design ensures that it won’t need to be replaced for
|Model||M/Flex for M2.1|
|Part Number||M/Flex for M2.1|
|Color||Polished Aluminum with White Trim, Silver with Gray Trim and Black with Black Trim|
|Weight Capacity||Up to 100 lbs|
|Arm Reach||Up to 28"|
|Height Adjustment||Up to 10" dynamic, Up to 30" static|
|Monitor Weight||Up to 6 monitors|
|Warranty||15 years 24/7|
- 1 stars 0
- 2 stars 0
- 3 stars 0
- 4 stars 0
- 5 stars 0
Humanscale offers the following warranties on its products, subject to any exclusions and limitations as set forth below:
|Customer’s Own Material (COM, COL)||No Warranty|
|Switch Mouse||1 Year, 24/7 Warranty|
|Technology Products||3 Years, Limited Warranty|
|Element Series Lights||10 Years, 24/7 Warranty|
|Horizon Series Lights||10 Years, 24/7 Warranty|
|Diffrient Series Lights||5 Years, 24/7 Warranty|
|Float Table, (Mechanical)||5 Years, 24/7 Warranty|
|eFloat and Electric Float||5 Years, 24/7 Warranty|
|QuickStand Sit/Stand Workstation, QuickStand Lite, QuickStand Eco, QuickStand Underdesk||5 Years, 24/7 Warranty|
|Fabric/Cushions/Arm Pads||5 Years, Single-Shift Warranty|
|M2, M/Flex & Para/Flex Monitor Arms||15 Years, 24/7 Warranty|
|M4, M7 & M8 Monitor Arms with Gas Cylinder Components||10 Years, 24/7 Warranty|
|Ballo Stool||3 Years, Single-Shift Warranty|
|Vessel Lights||10 Years, 24/7 Warranty, 3 Years 24/7 Warranty for the power supply driver|
|M/Connect||3 Years, 24/7 Warranty|
|M/Power||3 Years, 24/7 Warranty|
|M/Connect 2||3 Years, 24/7 Warranty|
|Monarch Mat||3 Years, 24/7 Warranty|
|Office IQ||1 Year, 24/7 Warranty|
|All other seating and products detailed in a current Humanscale Price Guide, unless otherwise specified||15 Years, 24/7 Warranty|
|All other products NOT detailed in a current Humanscale Price Guide||Varies; consult your Humanscale representative for details|
Modifying or tampering with any part of the base of the Float Table will
render the warranty void. The warranty on the Float Table applies to the base
and work surface if the table top is provided by Humanscale, and only to base if
the table top is provided by a third-party, provided that the third-party table
top meets the following requirements: (i) has a depth of 36" or less, (ii) has a
width of 72" or less, and (iii) the total weight load including work surface is
no more than 130 lbs for the standard base and no more than 160 lbs for the
heavy duty base.
Note: Ballo is not a task chair. It has not passed the BIFMA or European EN standards for office seating. The Ballo in an exercise chair that is designed for dynamic seating and frequent movement. All Ballo instructions should be followed to ensure a comfortable experience.
Modifying or tampering with any part of the base of the eFloat or electric Float will render the warranty void. The warranty on the eFloat and electric Float applies to the base and work surface if the table top is provided by Humanscale, and only to base if the table top is provided by a third-party, provided that the third-party table top meets the following requirements: (i) has a depth of 36" or less, (ii) has a width of 72" or less, and (iii) a total weight load including work surface of no more than 200 lbs.
The warranties for the Vessel lights exclude labor and other costs associated with the installation and/or removal of the lights from ceilings, walls, fixtures, etc. Further, Humanscale has no warranty obligations if the product is affected by internal or external environmental conditions (including but not limited to water, moisture, outdoor use, or temperature damage), power fluctuations, improper power supply, or if the product is not installed and used in compliance will all applicable standards and electrical codes.
These warranties are available to the original end-user customer only and are non-transferable. For these warranties to be valid, the Humanscale product must have been purchased directly from Humanscale and/or an authorized dealership, distributor, retailer and/or reseller of Humanscale products. If products are procured through an authorized dealership, distributor, retailer and/or reseller, the end-user customer must be registered with Humanscale for the warranty to be in effect. Humanscale warrants that, at the time of customer’s receipt, the product will be in good working order and will be free from defects in materials and workmanship for the duration of the warranty term, as set forth above. These warranties do not apply to normal wear and tear or damage caused by accident, neglect, product abuse, misuse and/or failure to follow instructions relating to the product’s installation or intended use. Humanscale will not be responsible for damage due to service, maintenance, modifications or tampering by anyone other than a Humanscale authorized representative. Humanscale will not be responsible for injury or damage caused by or associated with the installation and/or use of products in any manner other than in strict conformance with the instructions set forth in its installation manuals and instruction sheets and/or product literature. These warranties do not cover damage caused by a carrier or transportation of the product from one location to another, or alterations made by owner. Humanscale does not warrant damages or defects to the products under the following conditions: an Act of God, damage from electrical power problems, usage of parts or components not supplied by Humanscale, failure to perform preventative maintenance, or damage caused by peripherals not supplied by Humanscale.
In the event a product or product part is defective in material or workmanship during the warranty period, and Humanscale receives written notice of the defect within the warranty period, Humanscale will determine with customer if the defect is covered under warranty. Humanscale, at its option, may repair or replace the defective product or product part determined to be under warranty with the same or comparable product or product part as determined by Humanscale, at customer’s location or at a designated Humanscale location. The labor costs associated with the repair of the product or product part may be the responsibility of Humanscale if the product or product part is determined to be under warranty. Humanscale must pre-approve the labor costs prior to the repair or replacement of warranty products or product parts. Customer must contact Humanscale to obtain a Return Authorization through the Humanscale Customer Service Department. Performance of any repair or replacement does not renew or extend the warranty period. If, after examining and testing a returned product or product part, Humanscale determines that the product or product part is not defective, Humanscale will notify customer and return the product or product part to customer. Customer will be responsible for the freight charges associated with the return of non-defective products or product parts. To return a product or product part for repair that is not covered by warranty, Customer must request a Return Authorization through the Humanscale Customer Service Department. Customer will bear the costs of labor and freight charges associated with non-warranty repair. Customer will be charged a standard repair fee, specific to the product, for any product that is repaired outside of the warranty period. Repairs on products out of warranty also carry a 90-day warranty, effective the day that Customer receives the repaired product or product part. For products that are not covered under warranty: Customer may upgrade to a newer, functionally equivalent product at the list price; the product or product part will be returned to Customer; or Customer can request in writing that Humanscale dispose of the product or product part for Customer, in which case a fee may apply as designated by local law.
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER REPRESENTATIONS, WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED REPRESENTATIONS, WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, NON-INTERFERENCE, AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE.
Humanscale does not warrant that customer’s use of the Humanscale product will be uninterrupted or error free. Any implied warranties that may be imposed by law are limited in duration to the Limited Warranty period, to the greatest extent allowed by law. Some states or countries do not allow a limitation on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages for consumer products. In such states or countries, some exclusions or limitations of this Limited Warranty may not apply. This Limited Warranty is subject to change without notification.
Limitation of Liability
Purchaser’s remedies set forth herein are exclusive and the liability of Humanscale with respect to the breach of this agreement or any contract entered into between the parties pursuant hereto shall not exceed the price of the product or part on which such liability is based. In no event will Humanscale be liable to purchasers for any special, collateral, incidental or consequential damages however caused, whether by Humanscale’s negligence or otherwise. The remedies provided above are the purchaser’s sole remedies for any failure of Humanscale to comply with its obligations regarding the workmanship of its products. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Humanscale, with respect to or arising out of the product furnished hereunder.